This is a two channels LED strobe light flasher. The project can apply in many Vehicles, Discos & Lighting shows etc where the strobing effect is require.
Features
* 4 Modes Of Operation
* Mode Select by a single press
* Memorize the Selected Mode
* Minimum Parts Count
Mode 1 = Blinks 3 times per channel one after the other
Mode 2 = Blinks 1 time per channel one after the other
Mode 3 = Blinks both channels 3 times followed by a gap time
Mode 4 = Flashes both channels continuously
At each press on the switch the Mode will be change & it will be saved in the memory.After a power returns back the last selected mode will be available.
Note:
In the freeware version the memory function is disabled.In this version after power up the "Mode" sequence will be as follow = Mode 2, Mode 3, Mode 4, Mode 1.....
Features
* 4 Modes Of Operation
* Mode Select by a single press
* Memorize the Selected Mode
* Minimum Parts Count
Mode 1 = Blinks 3 times per channel one after the other
Mode 2 = Blinks 1 time per channel one after the other
Mode 3 = Blinks both channels 3 times followed by a gap time
Mode 4 = Flashes both channels continuously
At each press on the switch the Mode will be change & it will be saved in the memory.After a power returns back the last selected mode will be available.
Note:
In the freeware version the memory function is disabled.In this version after power up the "Mode" sequence will be as follow = Mode 2, Mode 3, Mode 4, Mode 1.....
Hello, my name is Jack Sparrow. I'm a 50 year old self-employed Pirate from the Caribbean.
No comments:
Post a Comment