Operation
It will flash the channel one number of times & same repeating to the channel two one after the other.
Features
*User defined number of flashes (1 to 20 flashes)
*User defined channel shifting speed.
*Mode select - strobe mode or single mode
What are the two modes?
Strobe mode - Flashing channels separately one after the other.
Single mode - Flash both channels at once continuously.
How to select mode?
When you power up it will work as strobe mode. When you press the switch it will shift to single mode. When you again press it will shift to strobe mode likewise when you press the switch it will switch between two modes.
How to edit number of flashes?
If you are in strobe mode if you press & hold the switch for 4 seconds it will automatically go to edit mode then you can see both channels will lights up. Now release the button. If you need 3 strobe pulses you press the button 3 times.For a visual indication the both channels will light up for each press.After automatically it will save the pulses & return to the strobe mode & you can see it will work with the newly saved values.
How adjust shifting speed?
At any time adjust the preset & it will vary the shifting speed of the two channels.
Note:
In single mode adjusting the preset value will cause the flashing rate.
